BITUPLAST® L

Elastomer-modified, fiber-reinforced, filled seam adhesive based on bitumen solvent

BITUPLAST® L is a ready-to-install, cold-processable and quick-drying polymer bitumen mass with fiber and mineral reinforcement. Due to the adhesive and solvent components it contains, BITUPLAST-L is very smooth and penetrates the pores and indentations. As a result, it forms a particularly strong connection with the flank and has a high level of stability shortly after the application process. The applied mass is quickly waterproof, even if it is not completely dry.

Application

BITUPLAST® L is especially suitable for seams in asphalt wearing courses (longitudinal and transverse seams) and for bonding plastic chamber filling elements in track construction.

BITUPLAST® L is not sensitive to frost. For better processing at low outside temperatures, the seam adhesive should first be stored at room temperature for a sufficient period of time. Due to the volatile solvents it contains, BITUPLAST® L seam adhesive must be labeled as dangerous goods and stored accordingly. In areas with insufficient air exchange, an adequate supply of fresh air must be ensured.

processing

The seam flank to be treated must be dry and clean. BITUPLAST® L is used with a seam flank height of 4 cm with 80 g/rm., with a seam flank height of 6 cm with 120 g/rm. applied. Processing can be done manually with a brush or spatula. Mechanical application is also possible. The containers must be stirred thoroughly before processing. After prolonged storage, the mass can settle. However, after thorough stirring, it can easily be brought back into a ready-to-use state. BITUPLAST® L is not suitable for profile compensation.

Theoretical material consumption

approx. 20-40 g/running meter per 1 cm layer thickness

form of delivery

hazard warnings

• R 11 highly flammable
• S 3/7/9 Keep container tightly closed in a cool, well-ventilated place.
• R 51/53 Toxic to aquatic organisms, may cause long-term damage in the aquatic environment. have effect.
• S16 Keep away from sources of ignition - no smoking.
• R 65 Harm: may cause lung damage if swallowed.
• S 23 Do not breathe vapors.
• S 29 Must not be allowed to enter drains.
• R 66 Repeated exposure may cause skin dryness or cracking.
• S 51 Use only in well-ventilated areas.

Please note that the information in this publication corresponds to our current knowledge. Due to the large number of possible influences when processing and using our products, they do not release the processor from carrying out his own tests. A legally binding assurance of certain properties or the suitability for a specific purpose cannot be derived from our information. Existing laws and regulations are the responsibility of the recipient of our products.