BITUREP® L
Where nothing holds, BITUREP holds!

for heavily loaded asphalt and concrete traffic areas
BITUREP® L is a one-component, cold-processed, immediately installable, solvent-based repair material

areas of application

• For heavily used traffic areas such as crossing areas, central seams, etc.
• Airfields - for small repairs in the area of runways and stands
• When patching potholes for level crossings in the asphalt/rail area
• As leveling material for ramps
• As sealing material after drilling asphalt or concrete
• On streets in the pavement renovation area
• In gardening and landscaping
  

processing

The area to be repaired must be freed from water, ice or dirt for optimal adhesion. The installation should be done with a thickness of 1 – 5 cm. Deeper damaged areas must first be filled with crushed stone or chippings. Alternatively, build up in layers in 2 layers. BITUREP® L is applied directly from the hobbock, distributed evenly and temporarily tapped down. The repaired damaged area is then compacted using a tamper or vibrator and sprinkled with sand or crushed sand. After curing, the area can be milled and built over and can be driven on again immediately. Road traffic ensures the final compaction

consumption

25 kg = 1 m x 18 mm

form of delivery

storage

BITUREP® L can be stored in closed containers for at least 1 year. Close opened containers again. In the winter months we recommend storage at room temperature for better workability

Please note that the information in this publication corresponds to our current knowledge. Due to the large number of possible influences when processing and using our products, they do not release the processor from carrying out his own tests. A legally binding assurance of certain properties or the suitability for a specific purpose cannot be derived from our information. Existing laws and regulations are the responsibility of the recipient of our products.