Kaltbitumen® L

for the production of mix suitable for cold paving

Application

Kaltbitumen® L enables the production of mixes using cold and moist minerals even in the cold season

For repairing potholes, improving profiles and creating thin, flexible pavements on roads, paths and squares
Kaltbitumen® L is suitable for asphalt and concrete surfaces

processing

Cold bitumen-L is processed in mechanical compulsory mixers using minerals in accordance with TLMin-StB83

Recipe (example):
50 percent by weight fine grit 5/8
35 percent by weight fine grit 2/5
15% by weight washed crushed sand 0/2
100 percent by weight mineral + 6.5 parts by weight Kaltbitumen® L

processing

Damaged areas in which cold mix material has been installed should be sanded

form of delivery

Notice

Kaltbitumen® L contains solvents - suitable safety measures must be observed. The material can be used as a center seam or primer

Please note that the information in this publication corresponds to our current knowledge. Due to the large number of possible influences when processing and using our products, they do not release the processor from carrying out his own tests. A legally binding assurance of certain properties or the suitability for a specific purpose cannot be derived from our information. Existing laws and regulations are the responsibility of the recipient of our products.